That documentation is valid on all Compute Modules but generally not needed on CM4.
Default is to swap i2c-10 to 0&1, and i2c-0 to 28&29 (NOT USEFUL on CM4), so you probably want
dtoverlay=cm-swap-i2c0,i2c10-gpio0,i2c0-gpio44
https://github.com/raspberrypi/linux/bl ... L994-L1007
Default is to swap i2c-10 to 0&1, and i2c-0 to 28&29 (NOT USEFUL on CM4), so you probably want
dtoverlay=cm-swap-i2c0,i2c10-gpio0,i2c0-gpio44
https://github.com/raspberrypi/linux/bl ... L994-L1007
Statistics: Posted by 6by9 — Sat Aug 17, 2024 8:09 pm