Here is the connector it was a 40 pin at the top on the right. The one next to it was for a rear facing camera. The TP connector at the bottom was for the touch screen panel. I believe it was a 6 or 8 pin flex cable.I would have said it's USB-C.
- Is that an HDMI port in the bottom right corner?
I've failed to find anything.
- Have you tried a web search for the numbers/codes on that sticker yet?
Can you take a photo of the connector from the PCB to the display?
Without any docs it'll be near impossible to get it working.
1600x600 is a slightly unusual resolution.
Waveshare make a display of that resolution with HDMI interface (https://www.waveshare.com/9.3inch-1600x600-LCD.htm), but I doubt that they'd sell that board without the display, and there are no guarantees that it would work.
Here is the heat shield with some more labels on it.
I googled all sticker numbers and nothing came up in search.
I tried the following boards already and got nothing:
https://amzn.eu/d/dyDSfhy
&
8.8 inch driver board from aliexpress as well
Statistics: Posted by RaspiKix — Thu Feb 20, 2025 6:44 pm