So i had a raspi 5 which i havent used for a while. Yesterday i connected it to a monitor but it didnt give out any output. So I crosschecked the monitor, sd card, power supply, with another new rpi 5 that i had and all the external devices worked properly. Then I noticed that in the faulty rpi, the led was blinking in a pattern. 4 long blinks and 3 rapid blinks. I searched it up and found that it is an RP1 not found error. I then looked into chatgpt for a solution. It told me to rewrite the EEPROM. I tried that, when i booted up the rpi, the led was solid for a few seconds, and then it started to blink rapidly. It was supposed to blink slowly after a few seconds...a minute at max, but it never stops blinking rapidly. I have also checked the UART output, it doesnt give out any output when i try to boot it with an OS SD card. I would appreciate any help that I can get with this issue
Statistics: Posted by Divyesh — Sat Jun 21, 2025 10:09 am