1. yes, but some GPIO have pull-ups assembled so consider thatHi,
I am working on the RPI-CM5-CM5IO board,
Can you please confirm below,
1.Can we configure the all the GPIO's from GPIO0 - GPIO27 as interrupts for required configuration (edge, level) or do we have any limitation?
2. I have required around 8 pins from these in my design.
2. so what? As long as you have sufficient amount of GPIO. If not think about adding a GPIO expander.
Statistics: Posted by aBUGSworstnightmare — Fri Jul 25, 2025 1:52 pm