The problem is while booting up rasbberry pi with uboot as boot loader not able to decrypt encrypted rootfs partition with initramfs,to debug and analyse what happening want to enable uboot debug logs.
When checked with current loglevel in Kconfig it show default i.e. CONFIG_LOGLEVEL=4 these are boot logs :
updated the common/Kconfig default to 7 still cannot see any change in the logs
kconfig snippet:
don't know if im able to config it correctly or are there other config parameters need to configure and which are those please let me know if any one has done this before.
When checked with current loglevel in Kconfig it show default i.e. CONFIG_LOGLEVEL=4 these are boot logs :
Code:
U-Boot 2024.04 (Apr 02 2024 - 10:58:58 +0000) DRAM: 948 MiB (effective 7.9 GiB) RPI 4 Model B (0xd03114) Core: 213 devices, 16 uclasses, devicetree: board MMC: mmcnr@7e300000: 1, mmc@7e340000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Card did not respond to voltage select! : -110 ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT! bcmgenet: PHY startup failed: -110 ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT! bcmgenet: PHY startup failed: -110 U-Boot>kconfig snippet:
Code:
config LOGLEVEL int "loglevel" default 7 range 0 10 help All Messages with a loglevel smaller than the console loglevel will be compiled in. The loglevels are defined as follows: 0 - emergency 1 - alert 2 - critical 3 - error 4 - warning 5 - note 6 - info 7 - debug 8 - debug content 9 - debug hardware I/OStatistics: Posted by Parag27 — Mon Jul 28, 2025 4:14 am