I have a trixie nvme drive running on my 500 through usb. when the drive was installed on the 500+ it appeared to boot normally but then stopped with the output below. I cloned the drive to another brand nvme and the same thing happened. Both drives appear to be on 500+ compatibility lists. When I tried to flash the new installed drive it did not appear on the output list of the imager application. Any thoughts?
Thanks,
Curt
Thanks,
Curt
Code:
Estimating resolution as 832Begin: Running /scripts/local-block ... done.Begin: Running /scripts/local-block ... done.Begin: Running /scripts/local-block ... done.done.Gave up waiting for root file system device. Common problems:— Boot args (cat /proc/cmdline)— Check rootdelay= (did the system wait long enough?)— Nissing modules (cat /proc/modules: Is /dev)ALERT? PARTUUID=9d28b7ce-02 does not exist. Dropping to a shellfBusyBox vi.37.0 (Debian 1:1.37.0-6+b3) built-in shell Cash)Enter ’help’ for a list of built-in commands.(initramfs) _Statistics: Posted by Curt Timmerman — Wed Oct 15, 2025 8:10 pm