I played around a bit with the drive strength. Unfortunately my flying wire setup is too crappy (long cables with multiple stages via stubs) even at lower speeds with high drive strength ![:P]( "Razz")
But we are planning to create a proper trace board anyhow for development, so this was more of a proof of concept with the Pico 2 and that definitely worked.
But we are planning to create a proper trace board anyhow for development, so this was more of a proof of concept with the Pico 2 and that definitely worked.
Statistics: Posted by TraceNV — Fri May 02, 2025 6:32 am