Hello,
Cool it with the arrogant and incorrect answers please!!!
What you suggest below is incorrect as I have a Pi3 B+ (as mentioned in the post). Adding this line does nothing.
The dtoverlay needed for the pi3 is
In fact doing what you say will result in the display just going blank.
why have you posted a link to a forum discussion on accelerometers? wlr-randr I have tried but it does not persist following a reboot.
Cool it with the arrogant and incorrect answers please!!!
yes I have and the solution noted in the documentation does not workso what? have you read the documentation as well https://www.raspberrypi.com/documentati ... lay-2.html
To set the screen orientation on a device that lacks a desktop environment, edit the /boot/firmware/cmdline.txt configuration file to pass an orientation to the system. Add the following entry to the end of cmdline.txt:
Code:
video=DSI-1:720x1280@60,rotate=<rotation-value>Code:
dtoverlay=vc4-kms-dsi-ili9881-7inch,rotation=90Code:
dtoverlay=vc4-kms-v3d,why have you posted a link to a forum discussion on accelerometers? wlr-randr I have tried but it does not persist following a reboot.
Statistics: Posted by pedrodamelon — Thu Jul 17, 2025 8:09 am